ORP BE32A Cheap 3 Function Hospital Electric Bed for Patient

The 3 function electric bed for patient is a type of medical equipment that allows the patient to adjust the position of the bed with a remote control. The 3 functions are: raising or lowering the head section, raising or lowering the foot section, and adjusting the height of the whole bed. These functions can help the patient achieve a comfortable posture, prevent pressure ulcers, facilitate transfers, and improve blood circulation. A 3 function electric bed for patient is usually made of a metal frame, a mattress, side rails, casters, and a motor. The motor is connected to a power source and operates the actuators that move the different sections of the bed. The remote control is attached to the side rail and has buttons for each function. A 3 function electric bed for patient is suitable for patients who need moderate assistance with mobility and positioning, such as those recovering from surgery, injury, or illness.

Technical Parameter:

Technical Configuration:

Optionals:

• Back-up Battery
• Bed Extension
• Nurse Controller
• Auto-regression Function
• Night Light
• Manual CPR
• Electric CPR
• X-ray Translucent Mattress Platform (Back Section)
• Monkey Pole

Product Introduction:

Quality Control:

• Technology: Using advanced robot 360° no-dead angle welding technology, the electric bed for patient is manufactured with a smooth and seamless surface that prevents bacteria and stains from accumulating, making it easy to clean and disinfect. The electric bed for patient conforms to the hospital’s sterile standards and guarantees the safety and comfort of patients. The material of the electric bed body undergoes special treatment to enhance its strength and durability, and to resist high temperature and corrosion, making it suitable for long-term use.
• Safety Standard: ORP electric bed for patient comply with ISO13485:2016 and ISO9001:2015 standards, that is, products that meet the requirements of international medical device quality management systems in terms of design, development, production, installation and service, and meet the requirements of international general standards in terms of quality management. These standards are designed to ensure that products are safe, effective and reliable, as well as meet customer and regulatory expectations.

Frameworks：

• Platform: The electric bed for patient’s bed platform uses a one-time stamping bed board, the surface is smooth, no gap, will not scratch the patient’s skin. The bed platform is welded by the robot, the structure is strong, and will not be loosened or deformed. Selection of high-quality steel, spray powder paint, corrosion resistance, wear resistance, beautiful and generous. It can bear 250kg and is suitable for patients of all sizes. It is divided into four sections, each part can be moved, and the Angle and height of the bed plate can be adjusted according to the needs of the patient. The bed board is convenient for disinfection and does not bend continuously to ensure the safety and health of patients. The optional transparency back section facilitates the doctor’s X-ray examination and treatment. ORP BE32A electric bed for patient board provides you with comfort and professional care.
• ABS Bed End With Safe Lock: The ABS Bed End With Safe Lock is a feature that enhances the safety and comfort of patients and caregivers using electric bed for patients. It is made of durable and lightweight ABS plastic that can withstand frequent use and cleaning. The bed end can be easily attached and detached from the bed frame with a simple locking mechanism that prevents accidental detachment or movement. The bed end also has a smooth and ergonomic design that reduces the risk of injury or infection. The ABS Bed End With Safe Lock is compatible with most models of electric bed for patients and can be customized to fit different sizes and colors. It is an ideal choice for hospitals, nursing homes, rehabilitation centers, and home care settings that require high-quality and reliable electric bed for patients.
• PP Side Rail: A PP side rail is a type of safety device that can be attached to an electric bed for patient. It is made of polypropylene, a durable and lightweight plastic material that is easy to clean and disinfect. PP side rails can help prevent patients from falling out of the bed, especially when the bed is adjusted to different positions. PP side rails can also provide support and comfort for patients who need to change their posture or get in and out of the bed. PP side rails are usually installed on both sides of the bed, but they can also be removed or lowered if needed. PP side rails are compatible with most electric bed for patients and can be easily attached or detached with a simple mechanism.

Functions:

• Back Section Adjustment: The electric bed for patient can adjust the angle of the back-rest according to the patient’s needs and comfort. The back-rest can be raised or lowered by using a remote control on the side rail of the bed. The recommended angle for the back-rest is 75°±10°. This angle provides optimal support for the patient’s spine, neck and head, and allows them to breathe easily and avoid pressure ulcers. The angle of the back-rest may vary depending on the patient’s condition, preferences and doctor’s orders. It is important to consult with the patient and their medical team before adjusting the back-rest of an electric bed for patient.
• Leg Section Adjustment: The leg plate adjustment ranges from 0 to 35°±10° and provides support and elevation for the patient’s knees and legs. Adjust by the remote control of the electric bed. Adjusting the leg plate can improve blood circulation and prevent blood clots in the leg. Can promote healing and recovery, prevent bedsores. By allowing patients to adjust the Angle and height of their knees according to their preferences and situation, comfort and sleep quality can be improved.
• Whole Bed Height Adjustment: The electric bed for patient allows the patients to adjust the height of the entire bed frame from 455mm to 745mm, depending on their needs and preferences. This allows the patient to change their height or position for various reasons, such as improving blood circulation, facilitating breathing, reducing pressure ulcers, or enhancing comfort. An electric bed for patient can also help caregivers to provide better care and avoid injuries from lifting or bending.

Accessories Details:

• Caster: The 5” double-sided advanced casters can handle different kinds of environments, such as wet, dusty, or hot ones. The casters have TPE anti-corrosion wheel glue that protects them from rusting and wearing out. They also have embedded spray type double seal quiet bearings that make them move smoothly and quietly. The casters have a brake pedal that can lock the wheels firmly. The casters also have the design of avoiding wire or cord entanglement.
• Bumper Cover: Bumper covers are equipped at each corner of the electric bed for patient to provide padding and safety in the event of impact. They are meant to avoid injuries, harm to furniture, and scuffs on walls that may occur due to unintentional collisions or movements while moving. Bumper covers are composed of soft and sturdy materials that can cushion shock and lower noise.
• Linear Motor: The electric bed for patient equip with 3 linear motors is a high-quality and advanced model that can offer more features and benefits than a standard electric bed. Linear motors can produce smooth, precise and fast motion, which is ideal for adjustable functional beds. Linear motors have many advantages over conventional rotary motors, such as higher speed, acceleration, precision, efficiency, and reliability. The noise level is only 50dB and the service life is up to 20,000 times.
• Angle Indicator: The side rail is embedded with four angle indicators, which can see the angle of the back section and the leg section from both sides. The angle indicator is clear and accurate, which can help the medical staff complete the Angle operation accurately.
• Central locking Pedal: The electric bed for patient has the central locking pedal, medical staffs can lock or unlock all the bed wheels at once. This feature saves them from having to adjust each wheel individually, which can be time-consuming and tedious. The central locking pedal also prevents the bed from moving or sliding unintentionally, which can pose a risk to patients and staff. The central locking pedal is simple to use and enhances work productivity and safety.
• IV Pole&IV Pole Prevision: This electric bed for patient is equipped with four infusion pole holders, one at each corner. The infusion poles are made of stainless steel and have four plastic hooks each. The hooks are designed to support up to 15 kg of weight per hook. The sockets allow for easy adjustment of the infusion pole height and position to suit the patient’s needs and treatment requirement.
• Drainage Hook: A drainage hook is a useful accessory for patients who require a drainage bag or a catheter bag while staying in an electric bed for patient. The hook is made of plastic and has a curved design that can be placed over the side rail or the foot board of the bed. The hook enables the bag to hang safely and comfortably without contacting the floor or the bed. This reduces the risk of infection, leakage, or spillage of the fluid in the bag.
• Hand Controller: A hand controller is a device that allows the user to adjust the position and functions of an electric bed for patient. A 3 function electric bed for patient is a type of bed that can be raised or lowered at the head, foot, and height sections. The hand controller usually has buttons or switches that correspond to each function, and can be attached to the bed frame or the side rails through a flexible spiral cable. The hand controller is an essential accessory for patients who need to change their posture frequently, or for caregivers who need to assist them.

PLATFORM

1.2mm thickness galvanized cold-rolled steel one-time impact briquetting, the surface is smooth without welding marks. Load capacity is 250KG.

HEAD AND FOOT BOARD

Detachable ABS headboard, ABS primary material injection moulding process, high temperature sterilized at 100 °C, tensile up-to 32MPa.

MEDICAL MOTOR

Reach the specifications of UL /ROHS/EN standards. Noise is less than 50dB, 20,000 times of life exercise. The bed equipped with 3 medical motors, 1 motor control box, 1 handle controller.

SIDE RAILS

PP adjustable side rails, one-time forming blow molding technology, side rail spring passed undergone 10,000 lifting tests without any blocking phenomenon. It can bear 200kg impact force.

CASTERS WITH CENTRAL LOCKING

Central locking design,4xφ125mm Passed durability test, 30km without abrasion. Anti-winding function, per caster bears 120kg Passed 500 times barrier test. double chip silent casters.